Rockwool
Lightly Resin Bonded Mattresses
Rockwool LRB mattresses are made up of fine fibers spun, obtained by melting specific rocks and further bonded with a thermosetting resin. It is manufactured by stitching flexible blanket to hexagonal GI wire mesh. It can be faced on one side or both sides. The facings may be Aluminium Foil or Galvanized wire mesh or Stainless Steel wire mesh etc. The mattress provides excellent stability, due to uniform thickness and density, resulting in prevention of heat losses. Rockwool mattress is considered as light weight thermal insulation for working temperature up to 750oC. As these mattresses are flexible, ideally can be used for insulation of curved surfaces like industrial boiler insulation, hot air duct insulation, tank insulation, heat exchanger, reactors, ovens and refrigeration equipment.
These are available in different densities and thicknesses.
Size | Mats of Width 1.22 M X 1.52 M / 1.22 M X 1.64 M |
Density | 100 / 120 / 150 KG / M3 |
Thickness | 25 / 40 / 50 / 65 / 75 / 100 MM |
Temp. Range | UPTO 750oC |
THIS PRODUCT CONFORMS TO IS: 8183
Resin Bonded Rockwool Slab
Resin Bonded (RB) Rockwool slabs are designed for thermal and acoustic insulation of flat or slightly curved surfaces with operating temperatures up to 750oC. Rockwool slabs can work at both high and low temperatures and provide excellent acoustical absorption, Refinery Insulation, noise reduction & sound insulation. These are quite versatile, easy to transport and easy to cut, fit and handle.
These can be used for insulation of ductings, ovens, vessels, tanks, cavity walls, curtain walls, sandwich panels and industrial equipment. In case of insulation of flat surfaces of furnaces, ship decks and boilers. Also can also be used for fire and personnel protection.
The product is available in variety of sizes and thicknesses. Also available with craft paper or Aluminum foil facing to meet projects/customers specific requirements.
Size | Slabs of width 0.5 M / 0.6 M X 1 M Length |
Density | 48 / 64 / 96 Kg / M3 |
Thickness | 25 / 40 / 50 / 65 / 75 / 100 MM |
Temp. Range | UPTO 750oC |
THIS PRODUCT CONFORMS TO IS: 8183
Rockwool Pipe Sections
Rockwool Pipe Sections are aesthetically designed for insulation of process and steam pipe lines in oil refineries, petrochemical plants, LNG plants, chemical plants, power plants and other areas where restricting heat flow plays a vital role. Rockwool Pipe Sections are also capable to withstand against low and high amplitude vibrations making it more versatile in industrial applications.
Advantages of using these pipe sections are :
This product provides excellent thermal & acoustic insulation with fire protection. It is non-combustible, water repellent, chemically Inert and CFC & HCFC Free.
These pipe sections are cost effective & maintenance free, easy to install and are available in different sizes & thickness.
Size | For Pipes of Outer Diameter 0.5" To 14" |
Density | 144 Kg / M3 |
Thickness | 25 / 40 / 50 / 65 / 75 MM |
Temp. Range | UPTO 800oC |
THIS PRODUCT CONFORMS TO IS: 9842
Rockwool Building Roll
Rockwool Building Rolls are made of bonded fiber insulation having maximum resistance to the passage of heat. Rockwool Building Rolls consist of triple benefits like thermal insulation, fire protection and acoustical properties. Rockwool Building Rolls can also be used for personnel protection which do not generate smoke and melt drops.
Rockwool Building roll, being a thermal insulation material, stops the heat flow and conserves lots of energy used in maintaining room temperature. With its sound absorption & acoustic insulation properties, outside noise can't enter. Its most important feature is the fire retention which provides safety from fire accidents.
These temperature resistant rolls are best suitable for use in pre-engineered buildings, pre-fabricated houses, poultry farms, airports, auditoriums, AC ducting, etc. Rckwool Building Roll is very quick and easy to install.
Size | Rolls of width 1.1 M X 6 / 7 M |
Density | 48 Kg / M3 |
Thickness | 40,50,60 MM |
THIS PRODUCT CONFORMS TO IS: 8183:93
Loose Mineral Wool/Slag Wool
Rockwool Loose Mineral Wool is produced from molten selected rocks. The Mineral Wool is an ideal material for most insulation applications because of its favourable handling and application characteristics. Loose Mineral Wool can be used for insulating cavity of irregular dimension in equipments, tank, pipeline, oven, furnace, car exhaust, chimney walls etc. It is highly suitable especially where performance insulation is difficult to apply. It is fire proof, dirt proof and moisture resistant. Chemically, it neither reacts nor accelerates corrosion. It is durable, odourless, easy to handle and store and conforms to IS:3677. The density of wool to be used depends on the thermal conductivity required.
Loose Mineral Wool is available in HDPE bags of 40 kg and can be used in a wide range of temperatures of -50oC to 750oC.